# *************************************************************************** # * (c) 2019 Eliud Cabrera Castillo * # * * # * This file is part of the FreeCAD CAx development system. * # * * # * This program is free software; you can redistribute it and/or modify * # * it under the terms of the GNU Lesser General Public License (LGPL) * # * as published by the Free Software Foundation; either version 2 of * # * the License, or (at your option) any later version. * # * for detail see the LICENCE text file. * # * * # * FreeCAD is distributed in the hope that it will be useful, * # * but WITHOUT ANY WARRANTY; without even the implied warranty of * # * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * # * GNU Library General Public License for more details. * # * * # * You should have received a copy of the GNU Library General Public * # * License along with FreeCAD; if not, write to the Free Software * # * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * # * USA * # * * # *************************************************************************** """Provides the task panel code for the Draft PolarArray tool.""" ## @package task_polararray # \ingroup drafttaskpanels # \brief Provides the task panel code for the Draft PolarArray tool. ## \addtogroup drafttaskpanels # @{ import PySide.QtGui as QtGui from PySide.QtCore import QT_TRANSLATE_NOOP import FreeCAD as App import FreeCADGui as Gui import Draft_rc # include resources, icons, ui files import DraftVecUtils import draftutils.utils as utils from FreeCAD import Units as U from draftutils.messages import _msg, _wrn, _err, _log from draftutils.translate import translate # The module is used to prevent complaints from code checkers (flake8) bool(Draft_rc.__name__) class TaskPanelPolarArray: """TaskPanel code for the PolarArray command. The names of the widgets are defined in the `.ui` file. This `.ui` file `must` be loaded into an attribute called `self.form` so that it is loaded into the task panel correctly. In this class all widgets are automatically created as `self.form.`. The `.ui` file may use special FreeCAD widgets such as `Gui::InputField` (based on `QLineEdit`) and `Gui::QuantitySpinBox` (based on `QAbstractSpinBox`). See the Doxygen documentation of the corresponding files in `src/Gui/`, for example, `InputField.h` and `QuantitySpinBox.h`. Attributes ---------- source_command: gui_base.GuiCommandBase This attribute holds a reference to the calling class of this task panel. This parent class, which is derived from `gui_base.GuiCommandBase`, is responsible for calling this task panel, for installing certain callbacks, and for removing them. It also delays the execution of the internal creation commands by using the `draftutils.todo.ToDo` class. See Also -------- * https://forum.freecad.org/viewtopic.php?f=10&t=40007 * https://forum.freecad.org/viewtopic.php?t=5374#p43038 """ def __init__(self): self.name = "Polar array" _log(translate("draft","Task panel:") + " {}".format(self.name)) # The .ui file must be loaded into an attribute # called `self.form` so that it is displayed in the task panel. ui_file = ":/ui/TaskPanel_PolarArray.ui" self.form = Gui.PySideUic.loadUi(ui_file) icon_name = "Draft_PolarArray" svg = ":/icons/" + icon_name pix = QtGui.QPixmap(svg) icon = QtGui.QIcon.fromTheme(icon_name, QtGui.QIcon(svg)) self.form.setWindowIcon(icon) self.form.setWindowTitle(translate("draft","Polar array")) self.form.label_icon.setPixmap(pix.scaled(32, 32)) # ------------------------------------------------------------------- # Default values for the internal function, # and for the task panel interface start_angle = U.Quantity(360.0, App.Units.Angle) angle_unit = start_angle.getUserPreferred()[2] self.angle = start_angle.Value self.number = 5 self.form.spinbox_angle.setProperty('rawValue', self.angle) self.form.spinbox_angle.setProperty('unit', angle_unit) self.form.spinbox_number.setValue(self.number) start_point = U.Quantity(0.0, App.Units.Length) length_unit = start_point.getUserPreferred()[2] self.center = App.Vector(start_point.Value, start_point.Value, start_point.Value) self.form.input_c_x.setProperty('rawValue', self.center.x) self.form.input_c_x.setProperty('unit', length_unit) self.form.input_c_y.setProperty('rawValue', self.center.y) self.form.input_c_y.setProperty('unit', length_unit) self.form.input_c_z.setProperty('rawValue', self.center.z) self.form.input_c_z.setProperty('unit', length_unit) self.fuse = utils.get_param("Draft_array_fuse", False) self.use_link = utils.get_param("Draft_array_Link", True) self.form.checkbox_fuse.setChecked(self.fuse) self.form.checkbox_link.setChecked(self.use_link) # ------------------------------------------------------------------- # Some objects need to be selected before we can execute the function. self.selection = None # This is used to test the input of the internal function. # It should be changed to True before we can execute the function. self.valid_input = False self.set_widget_callbacks() self.tr_true = QT_TRANSLATE_NOOP("Draft", "True") self.tr_false = QT_TRANSLATE_NOOP("Draft", "False") # The mask is not used at the moment, but could be used in the future # by a callback to restrict the coordinates of the pointer. self.mask = "" def set_widget_callbacks(self): """Set up the callbacks (slots) for the widget signals.""" # New style for Qt5 self.form.button_reset.clicked.connect(self.reset_point) # When the checkbox changes, change the internal value self.form.checkbox_fuse.stateChanged.connect(self.set_fuse) self.form.checkbox_link.stateChanged.connect(self.set_link) def accept(self): """Execute when clicking the OK button or Enter key.""" self.selection = Gui.Selection.getSelection() (self.number, self.angle) = self.get_number_angle() self.center = self.get_center() self.valid_input = self.validate_input(self.selection, self.number, self.angle, self.center) if self.valid_input: self.create_object() # The internal function already displays messages # self.print_messages() self.finish() def validate_input(self, selection, number, angle, center): """Check that the input is valid. Some values may not need to be checked because the interface may not allow to input wrong data. """ if not selection: _err(translate("draft","At least one element must be selected.")) return False # TODO: this should handle multiple objects. # Each of the elements of the selection should be tested. obj = selection[0] if obj.isDerivedFrom("App::FeaturePython"): _err(translate("draft","Selection is not suitable for array.")) _err(translate("draft","Object:") + " {}".format(selection[0].Label)) return False if number < 2: _err(translate("draft","Number of elements must be at least 2.")) return False if angle > 360: _wrn(translate("draft","The angle is above 360 degrees. It is set to this value to proceed.")) self.angle = 360 elif angle < -360: _wrn(translate("draft","The angle is below -360 degrees. It is set to this value to proceed.")) self.angle = -360 # The other arguments are not tested but they should be present. if center: pass self.fuse = self.form.checkbox_fuse.isChecked() self.use_link = self.form.checkbox_link.isChecked() return True def create_object(self): """Create the new object. At this stage we already tested that the input is correct so the necessary attributes are already set. Then we proceed with the internal function to create the new object. """ if len(self.selection) == 1: sel_obj = self.selection[0] else: # TODO: this should handle multiple objects. # For example, it could take the shapes of all objects, # make a compound and then use it as input for the array function. sel_obj = self.selection[0] # This creates the object immediately # obj = Draft.make_polar_array(sel_obj, # self.number, self.angle, self.center, # self.use_link) # Instead, we build the commands to execute through the caller # of this class, the GuiCommand. # This is needed to schedule geometry manipulation # that would crash Coin3D if done in the event callback. _cmd = "Draft.make_polar_array" _cmd += "(" _cmd += "App.ActiveDocument." + sel_obj.Name + ", " _cmd += "number=" + str(self.number) + ", " _cmd += "angle=" + str(self.angle) + ", " _cmd += "center=" + DraftVecUtils.toString(self.center) + ", " _cmd += "use_link=" + str(self.use_link) _cmd += ")" Gui.addModule('Draft') _cmd_list = ["_obj_ = " + _cmd, "_obj_.Fuse = " + str(self.fuse), "Draft.autogroup(_obj_)", "App.ActiveDocument.recompute()"] # We commit the command list through the parent command self.source_command.commit(translate("draft","Polar array"), _cmd_list) def get_number_angle(self): """Get the number and angle parameters from the widgets.""" number = self.form.spinbox_number.value() angle_str = self.form.spinbox_angle.text() angle = U.Quantity(angle_str).Value return number, angle def get_center(self): """Get the value of the center from the widgets.""" c_x_str = self.form.input_c_x.text() c_y_str = self.form.input_c_y.text() c_z_str = self.form.input_c_z.text() center = App.Vector(U.Quantity(c_x_str).Value, U.Quantity(c_y_str).Value, U.Quantity(c_z_str).Value) return center def reset_point(self): """Reset the center point to the original distance.""" self.form.input_c_x.setProperty('rawValue', 0) self.form.input_c_y.setProperty('rawValue', 0) self.form.input_c_z.setProperty('rawValue', 0) self.center = self.get_center() _msg(translate("draft","Center reset:") + " ({0}, {1}, {2})".format(self.center.x, self.center.y, self.center.z)) def print_fuse_state(self, fuse): """Print the fuse state translated.""" if fuse: state = self.tr_true else: state = self.tr_false _msg(translate("draft","Fuse:") + " {}".format(state)) def set_fuse(self): """Execute as a callback when the fuse checkbox changes.""" self.fuse = self.form.checkbox_fuse.isChecked() self.print_fuse_state(self.fuse) utils.set_param("Draft_array_fuse", self.fuse) def print_link_state(self, use_link): """Print the link state translated.""" if use_link: state = self.tr_true else: state = self.tr_false _msg(translate("draft","Create Link array:") + " {}".format(state)) def set_link(self): """Execute as a callback when the link checkbox changes.""" self.use_link = self.form.checkbox_link.isChecked() self.print_link_state(self.use_link) utils.set_param("Draft_array_Link", self.use_link) def print_messages(self): """Print messages about the operation.""" if len(self.selection) == 1: sel_obj = self.selection[0] else: # TODO: this should handle multiple objects. # For example, it could take the shapes of all objects, # make a compound and then use it as input for the array function. sel_obj = self.selection[0] _msg(translate("draft","Object:") + " {}".format(sel_obj.Label)) _msg(translate("draft","Number of elements:") + " {}".format(self.number)) _msg(translate("draft","Polar angle:") + " {}".format(self.angle)) _msg(translate("draft","Center of rotation:") + " ({0}, {1}, {2})".format(self.center.x, self.center.y, self.center.z)) self.print_fuse_state(self.fuse) self.print_link_state(self.use_link) def display_point(self, point=None, plane=None, mask=None): """Display the coordinates in the x, y, and z widgets. This function should be used in a Coin callback so that the coordinate values are automatically updated when the mouse pointer moves. This was copied from `DraftGui.py` but needs to be improved for this particular command. point : is a vector that arrives by the callback. plane : is a `WorkingPlane` instance, for example, `App.DraftWorkingPlane`. It is not used at the moment, but could be used to set up the grid. mask : is a string that specifies which coordinate is being edited. It is used to restrict edition of a single coordinate. It is not used at the moment but could be used with a callback. """ # Get the coordinates to display dp = None if point: dp = point # Set the widgets to the value of the mouse pointer. # # setProperty() is used if the widget is a FreeCAD widget like # Gui::InputField or Gui::QuantitySpinBox, which are based on # QLineEdit and QAbstractSpinBox. # # setText() is used to set the text inside the widget, this may be # useful in some circumstances. # # The mask allows editing only one field, that is, only one coordinate. # sbx = self.form.spinbox_c_x # sby = self.form.spinbox_c_y # sbz = self.form.spinbox_c_z if dp: if self.mask in ('y', 'z'): # sbx.setText(displayExternal(dp.x, None, 'Length')) self.form.input_c_x.setProperty('rawValue', dp.x) else: # sbx.setText(displayExternal(dp.x, None, 'Length')) self.form.input_c_x.setProperty('rawValue', dp.x) if self.mask in ('x', 'z'): # sby.setText(displayExternal(dp.y, None, 'Length')) self.form.input_c_y.setProperty('rawValue', dp.y) else: # sby.setText(displayExternal(dp.y, None, 'Length')) self.form.input_c_y.setProperty('rawValue', dp.y) if self.mask in ('x', 'y'): # sbz.setText(displayExternal(dp.z, None, 'Length')) self.form.input_c_z.setProperty('rawValue', dp.z) else: # sbz.setText(displayExternal(dp.z, None, 'Length')) self.form.input_c_z.setProperty('rawValue', dp.z) if plane: pass # Set masks if (mask == "x") or (self.mask == "x"): self.form.input_c_x.setEnabled(True) self.form.input_c_y.setEnabled(False) self.form.input_c_z.setEnabled(False) self.set_focus("x") elif (mask == "y") or (self.mask == "y"): self.form.input_c_x.setEnabled(False) self.form.input_c_y.setEnabled(True) self.form.input_c_z.setEnabled(False) self.set_focus("y") elif (mask == "z") or (self.mask == "z"): self.form.input_c_x.setEnabled(False) self.form.input_c_y.setEnabled(False) self.form.input_c_z.setEnabled(True) self.set_focus("z") else: self.form.input_c_x.setEnabled(True) self.form.input_c_y.setEnabled(True) self.form.input_c_z.setEnabled(True) self.set_focus() def set_focus(self, key=None): """Set the focus on the widget that receives the key signal.""" if key is None or key == "x": self.form.input_c_x.setFocus() self.form.input_c_x.selectAll() elif key == "y": self.form.input_c_y.setFocus() self.form.input_c_y.selectAll() elif key == "z": self.form.input_c_z.setFocus() self.form.input_c_z.selectAll() def reject(self): """Execute when clicking the Cancel button or pressing Escape.""" _msg(translate("draft","Aborted:") + " {}".format(translate("draft","Polar array"))) self.finish() def finish(self): """Finish the command, after accept or reject. It finally calls the parent class to execute the delayed functions, and perform cleanup. """ # App.ActiveDocument.commitTransaction() Gui.ActiveDocument.resetEdit() # Runs the parent command to complete the call self.source_command.completed() ## @}