#*************************************************************************** #* Copyright (c) 2020 Yorik van Havre * #* * #* This program is free software; you can redistribute it and/or modify * #* it under the terms of the GNU Lesser General Public License (LGPL) * #* as published by the Free Software Foundation; either version 2 of * #* the License, or (at your option) any later version. * #* for detail see the LICENCE text file. * #* * #* This program is distributed in the hope that it will be useful, * #* but WITHOUT ANY WARRANTY; without even the implied warranty of * #* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * #* GNU Library General Public License for more details. * #* * #* You should have received a copy of the GNU Library General Public * #* License along with this program; if not, write to the Free Software * #* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * #* USA * #* * #*************************************************************************** import FreeCAD from FreeCAD import Vector from draftutils.translate import translate WindowPresets = ["Fixed", "Open 1-pane", "Open 2-pane", "Sash 2-pane", "Sliding 2-pane", "Simple door", "Glass door", "Sliding 4-pane", "Awning"] def makeWindowPreset(windowtype,width,height,h1,h2,h3,w1,w2,o1,o2,placement=None): """makeWindowPreset(windowtype,width,height,h1,h2,h3,w1,w2,o1,o2,[placement]): makes a window object based on the given data. windowtype must be one of the names defined in Arch.WindowPresets""" if not FreeCAD.ActiveDocument: FreeCAD.Console.PrintError("No active document. Aborting\n") return def makeSketch(windowtype,width,height,h1,h2,h3,w1,w2,o1,o2): import Part import Sketcher width = float(width) height = float(height) h1 = float(h1) h2 = float(h2) h3 = float(h3) w1 = float(w1) w2 = float(w2) o1 = float(o1) o2 = float(o2) # h1, h2, w1, w2 cannot be null (for now) # TODO allow these to be null (don't create the component if so) if h1*h2*w1*w2 == 0: FreeCAD.Console.PrintError("H1, H2, W1 and W2 parameters cannot be zero. Aborting\n") return # small spacing to avoid wrong auto-wires in sketch tol = h1/10 # glass size divider gla = 10 s = FreeCAD.ActiveDocument.addObject('Sketcher::SketchObject','Sketch') def addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8): "adds two rectangles to the given sketch" idx = s.GeometryCount s.addGeometry(Part.LineSegment(p1,p2)) s.addGeometry(Part.LineSegment(p2,p3)) s.addGeometry(Part.LineSegment(p3,p4)) s.addGeometry(Part.LineSegment(p4,p1)) s.addConstraint(Sketcher.Constraint('Coincident',idx,2,idx+1,1)) s.addConstraint(Sketcher.Constraint('Coincident',idx+1,2,idx+2,1)) s.addConstraint(Sketcher.Constraint('Coincident',idx+2,2,idx+3,1)) s.addConstraint(Sketcher.Constraint('Coincident',idx+3,2,idx,1)) s.addConstraint(Sketcher.Constraint('Horizontal',idx)) s.addConstraint(Sketcher.Constraint('Horizontal',idx+2)) s.addConstraint(Sketcher.Constraint('Vertical',idx+1)) s.addConstraint(Sketcher.Constraint('Vertical',idx+3)) s.addGeometry(Part.LineSegment(p5,p6)) s.addGeometry(Part.LineSegment(p6,p7)) s.addGeometry(Part.LineSegment(p7,p8)) s.addGeometry(Part.LineSegment(p8,p5)) s.addConstraint(Sketcher.Constraint('Coincident',idx+4,2,idx+5,1)) s.addConstraint(Sketcher.Constraint('Coincident',idx+5,2,idx+6,1)) s.addConstraint(Sketcher.Constraint('Coincident',idx+6,2,idx+7,1)) s.addConstraint(Sketcher.Constraint('Coincident',idx+7,2,idx+4,1)) s.addConstraint(Sketcher.Constraint('Horizontal',idx+4)) s.addConstraint(Sketcher.Constraint('Horizontal',idx+6)) s.addConstraint(Sketcher.Constraint('Vertical',idx+5)) s.addConstraint(Sketcher.Constraint('Vertical',idx+7)) def simpleFrame(s,width,height,h1,h2,tol): "creates a simple frame with constraints" p1 = Vector(h1+tol,h1+tol,0) p2 = Vector(width-(h1+tol),h1+tol,0) p3 = Vector(width-(h1+tol),height-(h1+tol),0) p4 = Vector(h1+tol,height-(h1+tol),0) p5 = Vector(h1+h2,h1+h2,0) p6 = Vector(width-(h1+h2),h1+h2,0) p7 = Vector(width-(h1+h2),height-(h1+h2),0) p8 = Vector(h1+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) s.addConstraint(Sketcher.Constraint('DistanceX',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',14,1,10,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',14,1,10,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceY',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceX',10,1,6,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceY',10,1,6,1,tol)) if h2 == h1: s.renameConstraint(39,'Frame5') s.renameConstraint(40,'Frame6') s.renameConstraint(42,'Frame7') s.renameConstraint(41,'Frame8') def outerFrame(s,width,height,h1,w1,o1): p1 = Vector(0,0,0) p2 = Vector(width,0,0) p3 = Vector(width,height,0) p4 = Vector(0,height,0) p5 = Vector(h1,h1,0) p6 = Vector(width-h1,h1,0) p7 = Vector(width-h1,height-h1,0) p8 = Vector(h1,height-h1,0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) s.addConstraint(Sketcher.Constraint('DistanceY',1,height)) #16 s.addConstraint(Sketcher.Constraint('DistanceX',0,width)) #17 s.renameConstraint(16, 'Height') s.renameConstraint(17, 'Width') s.addConstraint(Sketcher.Constraint('DistanceY',6,2,2,2,h1)) s.addConstraint(Sketcher.Constraint('DistanceX',2,2,6,2,h1)) s.addConstraint(Sketcher.Constraint('DistanceX',4,2,0,2,h1)) s.addConstraint(Sketcher.Constraint('DistanceY',0,2,4,2,h1)) s.renameConstraint(18, 'Frame1') s.renameConstraint(19, 'Frame2') s.renameConstraint(20, 'Frame3') s.renameConstraint(21, 'Frame4') s.addConstraint(Sketcher.Constraint('Coincident',0,1,-1,1)) return ["OuterFrame","Frame","Wire0,Wire1",str(w1-w2)+"+V","0.00+V"] def doorFrame(s,width,height,h1,w1,o1): p1 = Vector(0,0,0) p2 = Vector(width,0,0) p3 = Vector(width,height,0) p4 = Vector(0,height,0) p5 = Vector(h1,0,0) p6 = Vector(width-h1,0,0) p7 = Vector(width-h1,height-h1,0) p8 = Vector(h1,height-h1,0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) s.addConstraint(Sketcher.Constraint('DistanceY',1,height)) #16 s.addConstraint(Sketcher.Constraint('DistanceX',0,width)) #17 s.renameConstraint(16, 'Height') s.renameConstraint(17, 'Width') s.addConstraint(Sketcher.Constraint('DistanceY',6,2,2,2,h1)) s.addConstraint(Sketcher.Constraint('DistanceX',2,2,6,2,h1)) s.addConstraint(Sketcher.Constraint('DistanceX',4,2,0,2,h1)) s.addConstraint(Sketcher.Constraint('DistanceY',0,2,4,2,0.0)) s.addConstraint(Sketcher.Constraint('Coincident',0,1,-1,1)) s.renameConstraint(18, 'Frame1') s.renameConstraint(19, 'Frame2') s.renameConstraint(20, 'Frame3') return ["OuterFrame","Frame","Wire0,Wire1",str(w1-w2)+"+V","0.00+V"] if windowtype == "Fixed": wp = outerFrame(s,width,height,h1,w1,o1) wp.extend(["Glass","Glass panel","Wire1",str(w1/gla),str(w1/2)+"+V"]) elif windowtype == "Open 1-pane": wp = outerFrame(s,width,height,h1,w1,o1) simpleFrame(s,width,height,h1,h2,tol) fw = str(w2) if w2 == w1: fw = "0.00+V" wp.extend(["InnerFrame","Frame","Wire2,Wire3,Edge8,Mode1",fw,str(o2)+"+V"]) wp.extend(["InnerGlass","Glass panel","Wire3",str(w2/gla),str(o2+w2/2)+"+V"]) elif windowtype == "Open 2-pane": wp = outerFrame(s,width,height,h1,w1,o1) p1 = Vector(h1+tol,h1+tol,0) p2 = Vector((width/2)-tol,h1+tol,0) p3 = Vector((width/2)-tol,height-(h1+tol),0) p4 = Vector(h1+tol,height-(h1+tol),0) p5 = Vector(h1+h2,h1+h2,0) p6 = Vector((width/2)-h2,h1+h2,0) p7 = Vector((width/2)-h2,height-(h1+h2),0) p8 = Vector(h1+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) p1 = Vector((width/2)+tol,h1+tol,0) p2 = Vector(width-(h1+tol),h1+tol,0) p3 = Vector(width-(h1+tol),height-(h1+tol),0) p4 = Vector((width/2)+tol,height-(h1+tol),0) p5 = Vector((width/2)+h2,h1+h2,0) p6 = Vector(width-(h1+h2),h1+h2,0) p7 = Vector(width-(h1+h2),height-(h1+h2),0) p8 = Vector((width/2)+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) s.addConstraint(Sketcher.Constraint('DistanceY',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',21,2,17,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',21,2,17,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',16,1,20,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',14,1,10,1,h2)) s.addConstraint(Sketcher.Constraint('Equal',22,14)) s.addConstraint(Sketcher.Constraint('DistanceY',8,2,16,1,0.0)) s.addConstraint(Sketcher.Constraint('DistanceY',10,1,18,2,0.0)) s.addConstraint(Sketcher.Constraint('DistanceX',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceY',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceX',6,1,18,1,-tol)) s.addConstraint(Sketcher.Constraint('DistanceY',6,1,18,1,-tol)) s.addConstraint(Sketcher.Constraint('DistanceX',9,1,19,2,tol)) s.addConstraint(Sketcher.Constraint('PointOnObject',13,2,22)) s.addConstraint(Sketcher.Constraint('PointOnObject',20,1,12)) if h1 == h2: s.renameConstraint(55,'Frame5') s.renameConstraint(56,'Frame6') s.renameConstraint(57,'Frame7') s.renameConstraint(58,'Frame8') s.renameConstraint(59,'Frame9') s.renameConstraint(60,'Frame10') fw = str(w2) if w2 == w1: fw = "0.00+V" wp.extend(["LeftFrame","Frame","Wire2,Wire3,Edge8,Mode1",fw,str(o2)+"+V"]) wp.extend(["LeftGlass","Glass panel","Wire3",str(w2/gla),str(o2+w2/2)+"+V"]) wp.extend(["RightFrame","Frame","Wire4,Wire5,Edge6,Mode2",fw,str(o2)+"+V"]) wp.extend(["RightGlass","Glass panel","Wire5",str(w2/gla),str(o2+w2/2)+"+V"]) elif windowtype == "Sash 2-pane": wp = outerFrame(s,width,height,h1,w1,o1) p1 = Vector(h1+tol,h1+tol,0) p2 = Vector(width-(h1+tol),h1+tol,0) p3 = Vector(width-(h1+tol),(height/2)-tol,0) p4 = Vector(h1+tol,(height/2)-tol,0) p5 = Vector(h1+h2,h1+h2,0) p6 = Vector(width-(h1+h2),h1+h2,0) p7 = Vector(width-(h1+h2),(height/2)-h2,0) p8 = Vector(h1+h2,(height/2)-h2,0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) p1 = Vector(h1+tol,(height/2)+tol,0) p2 = Vector(width-(h1+tol),(height/2)+tol,0) p3 = Vector(width-(h1+tol),height-(h1+tol),0) p4 = Vector(h1+tol,height-(h1+tol),0) p5 = Vector(h1+h2,(height/2)+h2,0) p6 = Vector(width-(h1+h2),(height/2)+h2,0) p7 = Vector(width-(h1+h2),height-(h1+h2),0) p8 = Vector(h1+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) s.addConstraint(Sketcher.Constraint('DistanceY',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',21,2,17,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',21,2,17,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',16,2,20,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',10,2,14,2,-h2)) s.addConstraint(Sketcher.Constraint('Equal',23,15)) s.addConstraint(Sketcher.Constraint('DistanceX',12,1,20,1,0.0)) s.addConstraint(Sketcher.Constraint('DistanceX',13,2,20,2,0.0)) s.addConstraint(Sketcher.Constraint('DistanceX',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceY',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceX',6,1,18,1,-tol)) s.addConstraint(Sketcher.Constraint('DistanceY',6,1,18,1,-tol)) s.addConstraint(Sketcher.Constraint('DistanceY',10,1,16,1,tol)) s.addConstraint(Sketcher.Constraint('PointOnObject',9,2,17)) s.addConstraint(Sketcher.Constraint('PointOnObject',16,1,11)) if h1 == h2: s.renameConstraint(55,'Frame5') s.renameConstraint(56,'Frame6') s.renameConstraint(57,'Frame7') s.renameConstraint(58,'Frame8') s.renameConstraint(59,'Frame9') s.renameConstraint(60,'F10') s.setExpression('.Constraints.F10','-.Constraints.Frame5') fw = str(w2) if w2 == w1: fw = "0.00+V" wp.extend(["LowerFrame","Frame","Wire2,Wire3",fw,str(o2+w2)+"+V"]) wp.extend(["LowerGlass","Glass panel","Wire3",str(w2/gla),str(o2+w2+w2/2)+"+V"]) wp.extend(["UpperFrame","Frame","Wire4,Wire5",fw,str(o2)+"+V"]) wp.extend(["UpperGlass","Glass panel","Wire5",str(w2/gla),str(o2+w2/2)+"+V"]) elif windowtype == "Sliding 2-pane": wp = outerFrame(s,width,height,h1,w1,o1) p1 = Vector(h1+tol,h1+tol,0) p2 = Vector((width/2)-tol,h1+tol,0) p3 = Vector((width/2)-tol,height-(h1+tol),0) p4 = Vector(h1+tol,height-(h1+tol),0) p5 = Vector(h1+h2,h1+h2,0) p6 = Vector((width/2)-h2,h1+h2,0) p7 = Vector((width/2)-h2,height-(h1+h2),0) p8 = Vector(h1+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) p1 = Vector((width/2)+tol,h1+tol,0) p2 = Vector(width-(h1+tol),h1+tol,0) p3 = Vector(width-(h1+tol),height-(h1+tol),0) p4 = Vector((width/2)+tol,height-(h1+tol),0) p5 = Vector((width/2)+h2,h1+h2,0) p6 = Vector(width-(h1+h2),h1+h2,0) p7 = Vector(width-(h1+h2),height-(h1+h2),0) p8 = Vector((width/2)+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) s.addConstraint(Sketcher.Constraint('DistanceY',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',21,2,17,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',21,2,17,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',16,1,20,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',14,1,10,1,h2)) s.addConstraint(Sketcher.Constraint('Equal',22,14)) s.addConstraint(Sketcher.Constraint('DistanceY',8,2,16,1,0.0)) s.addConstraint(Sketcher.Constraint('DistanceY',10,1,18,2,0.0)) s.addConstraint(Sketcher.Constraint('DistanceX',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceY',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceX',6,1,18,1,-tol)) s.addConstraint(Sketcher.Constraint('DistanceY',6,1,18,1,-tol)) s.addConstraint(Sketcher.Constraint('DistanceX',9,1,19,2,tol)) s.addConstraint(Sketcher.Constraint('PointOnObject',13,2,22)) s.addConstraint(Sketcher.Constraint('PointOnObject',12,2,20)) if h1 == h2: s.renameConstraint(55,'Frame5') s.renameConstraint(56,'Frame6') s.renameConstraint(57,'Frame7') s.renameConstraint(58,'Frame8') s.renameConstraint(59,'Frame9') s.renameConstraint(60,'Frame10') fw = str(w2) if w2 == w1: fw = "0.00+V" wp.extend(["LeftFrame","Frame","Wire2,Wire3",fw,str(o2)+"+V"]) wp.extend(["LeftGlass","Glass panel","Wire3",str(w2/gla),str(o2+w2/2)+"+V"]) wp.extend(["RightFrame","Frame","Wire4,Wire5",fw,str(o2+w2)+"+V"]) wp.extend(["RightGlass","Glass panel","Wire5",str(w2/gla),str(o2+w2+w2/2)+"+V"]) elif windowtype == "Sliding 4-pane": wp = outerFrame(s,width,height,h1,w1,o1) p1 = Vector(h1+tol,h1+tol,0) p2 = Vector(width/4-tol,h1+tol,0) p3 = Vector(width/4-tol,height-(h1+tol),0) p4 = Vector(h1+tol,height-(h1+tol),0) p5 = Vector(h1+h2,h1+h2,0) p6 = Vector(width/4-h2,h1+h2,0) p7 = Vector(width/4-h2,height-(h1+h2),0) p8 = Vector(h1+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) p1 = Vector(width/4+tol,h1+tol,0) p2 = Vector(width/2-tol,h1+tol,0) p3 = Vector(width/2-tol,height-(h1+tol),0) p4 = Vector(width/4+tol,height-(h1+tol),0) p5 = Vector(width/4+h2,h1+h2,0) p6 = Vector(width/2-h2,h1+h2,0) p7 = Vector(width/2-h2,height-(h1+h2),0) p8 = Vector(width/4+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) p1 = Vector(width/2+tol,h1+tol,0) p2 = Vector(width*3/4-tol,h1+tol,0) p3 = Vector(width*3/4-tol,height-(h1+tol),0) p4 = Vector(width/2+tol,height-(h1+tol),0) p5 = Vector(width/2+h2,h1+h2,0) p6 = Vector(width*3/4-h2,h1+h2,0) p7 = Vector(width*3/4-h2,height-(h1+h2),0) p8 = Vector(width/2+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) p1 = Vector(width*3/4+tol,h1+tol,0) p2 = Vector(width-(h1+tol),h1+tol,0) p3 = Vector(width-(h1+tol),height-(h1+tol),0) p4 = Vector(width*3/4+tol,height-(h1+tol),0) p5 = Vector(width*3/4+h2,h1+h2,0) p6 = Vector(width-(h1+h2),h1+h2,0) p7 = Vector(width-(h1+h2),height-(h1+h2),0) p8 = Vector(width*3/4+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) s.addConstraint(Sketcher.Constraint('DistanceX',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceX',8,2,16,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceX',17,1,27,2,tol)) s.addConstraint(Sketcher.Constraint('DistanceX',24,2,32,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceX',32,2,4,2,tol)) s.addConstraint(Sketcher.Constraint('DistanceY',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceY',10,2,6,2,tol)) s.addConstraint(Sketcher.Constraint('DistanceY',17,2,26,2,0.0)) s.addConstraint(Sketcher.Constraint('DistanceY',25,2,34,2,0.0)) s.addConstraint(Sketcher.Constraint('DistanceY',8,2,16,1,0.0)) s.addConstraint(Sketcher.Constraint('DistanceY',9,2,18,2,0.0)) s.addConstraint(Sketcher.Constraint('DistanceY',16,2,24,1,0.0)) s.addConstraint(Sketcher.Constraint('DistanceY',24,2,32,1,0.0)) s.addConstraint(Sketcher.Constraint('DistanceX',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',13,2,9,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',13,2,9,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',16,1,20,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',16,1,20,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',21,2,17,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',21,2,17,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',24,1,28,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',24,1,28,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',29,2,25,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',29,2,25,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',32,1,36,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',32,1,36,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',37,2,33,2,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',37,2,33,2,h2)) s.addConstraint(Sketcher.Constraint('Equal',14,22)) s.addConstraint(Sketcher.Constraint('Equal',22,30)) s.addConstraint(Sketcher.Constraint('Equal',30,38)) if h1 == h2: s.renameConstraint(100,'Frame5') s.renameConstraint(101,'Frame6') s.renameConstraint(102,'Frame7') s.renameConstraint(103,'Frame8') s.renameConstraint(104,'Frame9') s.renameConstraint(105,'Frame10') s.renameConstraint(106,'Frame11') s.renameConstraint(107,'Frame12') s.renameConstraint(108,'Frame13') s.renameConstraint(109,'Frame14') s.renameConstraint(110,'Frame15') s.renameConstraint(111,'Frame16') s.renameConstraint(112,'Frame17') s.renameConstraint(113,'Frame18') s.renameConstraint(114,'Frame19') s.renameConstraint(115,'Frame20') fw = str(w2) if w2 == w1: fw = "0.00+V" wp.extend(["LeftMostFrame","Frame","Wire2,Wire3",fw,str(o2)+"+V"]) wp.extend(["LeftMostGlass","Glass panel","Wire3",str(w2/gla),str(o2+w2/2)+"+V"]) wp.extend(["LeftFrame","Frame","Wire4,Wire5",fw,str(o2+w2)+"+V"]) wp.extend(["LeftGlass","Glass panel","Wire5",str(w2/gla),str(o2+w2+w2/2)+"+V"]) wp.extend(["RightFrame","Frame","Wire6,Wire7",fw,str(o2+w2)+"+V"]) wp.extend(["RightGlass","Glass panel","Wire7",str(w2/gla),str(o2+w2+w2/2)+"+V"]) wp.extend(["RightMostFrame","Frame","Wire8,Wire9",fw,str(o2)+"+V"]) wp.extend(["RightMostGlass","Glass panel","Wire9",str(w2/gla),str(o2+w2/2)+"+V"]) elif windowtype == "Awning": wp = outerFrame(s,width,height,h1,w1,o1) simpleFrame(s,width,height,h1,h2,tol) fw = str(w2) if w2 == w1: fw = "0.00+V" wp.extend(["InnerFrame","Frame","Wire2,Wire3,Edge7,Mode1",fw,str(o2)+"+V"]) wp.extend(["InnerGlass","Glass panel","Wire3",str(w2/gla),str(o2+w2/2)+"+V"]) elif windowtype == "Simple door": wp = doorFrame(s,width,height,h1,w1,o1) wp.extend(["Door","Solid panel","Wire1,Edge8,Mode1",str(w2),str(o2)+"+V"]) elif windowtype == "Glass door": wp = doorFrame(s,width,height,h1,w1,o1) p1 = Vector(h1+tol,h1+tol,0) p2 = Vector(width-(h1+tol),h1+tol,0) p3 = Vector(width-(h1+tol),height-(h1+tol),0) p4 = Vector(h1+tol,height-(h1+tol),0) p5 = Vector(h1+h2,h1+h3,0) p6 = Vector(width-(h1+h2),h1+h3,0) p7 = Vector(width-(h1+h2),height-(h1+h2),0) p8 = Vector(h1+h2,height-(h1+h2),0) addFrame(s,p1,p2,p3,p4,p5,p6,p7,p8) s.addConstraint(Sketcher.Constraint('DistanceX',8,1,12,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',8,1,12,1,h3)) s.addConstraint(Sketcher.Constraint('DistanceX',14,1,10,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceY',14,1,10,1,h2)) s.addConstraint(Sketcher.Constraint('DistanceX',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceY',4,1,8,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceX',10,1,6,1,tol)) s.addConstraint(Sketcher.Constraint('DistanceY',10,1,6,1,tol)) if h2 == h1: s.renameConstraint(39,'Frame5') s.renameConstraint(40,'Frame6') s.renameConstraint(42,'Frame7') s.renameConstraint(41,'Frame8') fw = str(w2) if w2 == w1: fw = "0.00+V" wp.extend(["InnerFrame","Frame","Wire2,Wire3,Edge8,Mode1",fw,str(o2)+"+V"]) wp.extend(["InnerGlass","Glass panel","Wire3",str(w2/gla),str(o2+w2/2)+"+V"]) return (s,wp) if windowtype in WindowPresets: import ArchWindow default = makeSketch(windowtype,width,height,h1,h2,h3,w1,w2,o1,o2) FreeCAD.ActiveDocument.recompute() if default: if placement: default[0].Placement = placement FreeCAD.ActiveDocument.recompute() obj = ArchWindow.makeWindow(default[0],width,height,default[1]) obj.Preset = WindowPresets.index(windowtype)+1 obj.Frame = h1 obj.Offset = o1 obj.Placement = FreeCAD.Placement() # unable to find where this bug comes from... if "door" in windowtype: obj.IfcType = "Door" obj.Label = translate("Arch","Door") FreeCAD.ActiveDocument.recompute() return obj print("Arch: Unknown window type")